ESCAPE 1800-I

DB03125

(294)

See reviews

CAD $2,149.00

Made in

Canada

USA

Heating area500 - 2,100 ft²

RECOMMENDED AREA MAP BY CLIMATE ZONE

Size28 3/8" W X 26 3/8" D X 23 1/8" H

Maximum log length20"

Average particulate emission rate2.3 g/h

In stock

Description

Ideal for heating up to 2,100 ft², the Escape 1800 is the ultimate versatile wood insert! With only 2.3 g/h of particulate emissions, this non-catalytic appliance gives off up to 75,000 BTU/h. The Escape 1800 is the perfect choice to update your masonry fireplace and make it efficient!

Included: blower, ceramic glass, ash lip, air damper

▪Suitable for masonry fireplaces only
▪Burn time up to 8 hours
▪Up to 20" logs
▪2.4 ft³ firebox
▪Robust 5/16" steel reinforced with a stainless steel heat shield
▪Glass airwash system for a cleaner view of the flames
▪EPA certified
▪Proudly made in Canada and the USA
▪Limited lifetime warranty
▪Faceplate much be purchased separately

Any installation must be done according to the data and drawings detailed in the owner’s manual.

Options

Specifications

Fuel type	Dry cordwood (16" recommended)
Heating area (8)	500 - 2,100 ft²
Overall firebox volume	2.4 ft³
EPA loading volume	1.95 ft³
Maximum burn time (8)	8 h
Maximum heat output-dry cordwood (4)	75,000 BTU/h (22.0 kW)
Minimum overall heat output rate (4) (5)	14,200 BTU/h (4.16 kW)
Maximum overall heat output rate (4) (5)	44,500 BTU/h (13.04 kW)
Average overall efficiency-dry cordwood (HHV) (5) (6)	72 %
Average overall efficiency-dry cordwood (LHV) (5) (7)	77 %
Optimum efficiency (1) (2)	79 %
Optimum heat transfer efficiency (10)	76 %
Average particulate emission rate (3)	2.3 g/h
Average CO (9)	69 g/h
Size	Large
Premium quality blower included (CFM)	144
Certified according to applicable standards	By an accredited laboratory (CAN/USA)
Combustion technology	Non-catalytic
Stainless-steel secondary-air system	Yes
Flue outlet diameter	6"
Distance-center of the flue outlet to back unit	6 7/8"
Distance-center of the flue outlet to side unit	13 1/2"
Recommended chimney diameter	6"
Type of chimney	Liner - ULC-S635, CAN/ULC-S640, UL1777
Minimum chimney height	12'
Overall dimension (Width)	28 3/8"

Overall dimension (Height)	23 1/8"
Overall dimension (Depth)	26 3/8"
Door type	Single, glass with cast iron frame
Door opening size (Width)	17 1/2"
Door opening size (Height)	9"
Glass type	Ceramic glass
Glass surface - W x H	16" x 9 1/4"
Steel thickness-body	3/16"
Steel thickness-top	5/16"
Firebox size (Width)	21"
Firebox size (Height)	11 7/8"
Firebox size (Depth)	16 1/2"
Maximum log length	20"
Log positioning	Loading over width
Firebox lined with refractory bricks	Yes
Baffle type	High quality vermiculite
Minimum fireplace opening (Width)	28 7/8"
Minimum fireplace opening (Height)	23 3/8"
Minimum fireplace opening (Depth)	15 3/4"
High-efficiency certified appliance	Yes, EPA 2020 approved
Canadian Standard (emissions)	CSA B415.1-10
USA Standard (emissions)	EPA / ASTM WK47329
Canadian Standard (safety)	ULC S628
USA Standard (safety)	UL 1482, UL 737
Warranty	Limited lifetime
Shipping weight	405 lb (178 kg)

Clearances to combustibles*	Canada USA
Clearance - Base of the unit to ceiling**	84"84"
Clearance - Combustible side mantle to unit	9"9"
Clearance - Combustible top mantle to unit	27"27"
Clearance - Combustible side wall to unit	16"16"
Clearance - Top of the unit to a 12" combustible mantle shelf	27"27"

*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
5. As measured per CSA B415.1-10 stack loss method.
6. Higher Heating Value of the fuel.
7. Lower Heating Value of the fuel.
8. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
9. Carbon monoxyde.
10. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

Manuals and documents

Authorized retailers

Other customers also like

Suggestions

EPA 2020

Wood Insert | LargeESCAPE 1800-I + FACEPLATE + 35' LINER KIT DB03128KCAD $2,599.00IN STOCK

(26)

EPA 2020

Wood Insert | LargeESCAPE 1800-I + FACEPLATE + 25' LINER KIT DB03127KCAD $2,499.00IN STOCK

(88)

What our other customers are sayingReview

Share your opinion with othersYour comments are important for us. Share your experience of using or installing a Drolet appliance, or even on customer service with our team!

5 ★

1704 ★

1023 ★

162 ★

41 ★

Sergio2025-04-08

Having a problem with the fan working not happy about the heat sensor, if its not working properly I get no air circulation

Alexander 2025-03-09

Mike2025-03-05

Works great

Mike2025-03-04

Well made

James2025-02-04

Vincent2025-01-30

ashley2025-01-27