Attention : Les encastrables à bois doivent uniquement être installés dans un foyer de maçonnerie et jamais dans un châssis en bois ou tout autre matériau combustible.
Idéal pour chauffer jusqu’à 2,100 pi², l'Escape 1800 est l'encastrable à bois polyvalent par excellence! Avec seulement 2.3 g/h d’émissions de particules, cet appareil non catalytique dégage jusqu'à 75,000 BTU/h. L'Escape 1800 est le choix parfait pour transformer votre foyer de maçonnerie et le rendre performant!
Inclus : ventilateur, verre céramique, tablette à cendres, contrôle d’air
▪Convient seulement aux installations dans un foyer de maçonnerie
▪Temps de combustion jusqu’à 8 heures
▪Bûches de 20"
▪Chambre à combustion de 2.4 pi³
▪Dessus en acier robuste 5/16" renforci d’un bouclier thermique en acier inoxydable
▪Système autonettoyant de la vitre (airwash) pour une vue plus nette des flammes
▪Certifié EPA
▪Fièrement fabriqué au Québec et aux États-Unis
▪Garantie à vie limitée
▪La façade doit être achetée séparément
Toute installation doit se faire à la lumière des données et des graphiques détaillés dans le manuel.
Options
Spécifications
Type de combustible
Bûches de bois sec (16" recommandée)
Superficie de chauffage (9)
500 - 2,100 pi²
Volume total de la chambre à combustion
2.4 pi³
Volume de chargement EPA
1.95 pi³
Temps de combustion maximal (9)
8 h
Puissance thermique maximale-bûches de bois sec (4)
75,000 BTU/h (22.0 kW)
Puissance thermique minimale globale (4) (5)
14,200 BTU/h (4.16 kW)
Puissance thermique maximale globale (4) (5)
44,500 BTU/h (13.04 kW)
Rendement moyen global-bûches de bois sec (PCS) (5) (6)
72 %
Rendement moyen global-bûches de bois sec (PCI) (5) (7)
77 %
Rendement optimal (1) (2)
79 %
Rendement optimal du transfert de chaleur (8)
76 %
Taux moyen d'émissions de particules (3)
2.3 g/h
Taux moyen de CO (10)
69 g/h
Dimension
Grand
Ventilateur de première qualité inclus (PCM)
144
Certifié selon les standards applicables
Un laboratoire accrédité (CAN/É.-U.)
Technologie de combustion
Non catalytique
Système d'air secondaire en acier inoxydable
Oui
Diamètre de la buse de raccordement
6"
Distance du centre de la buse à l'arrière
6 7/8"
Distance du centre de la buse au côté
13 1/2"
Diamètre de cheminée recommandée
6"
Type de cheminée
Liner - ULC-S635, CAN/ULC-S640, UL1777
Hauteur minimale de la cheminée
12'
Dimension hors-tout (Largeur)
28 3/8"
Dimension hors-tout (Hauteur)
23 1/8"
Dimension hors-tout (Profondeur)
26 3/8"
Type de porte
Simple, vitrée, avec cadre en fonte
Ouverture de porte (Largeur)
17 1/2"
Ouverture de porte (Hauteur)
9"
Type de vitre
Verre céramique
Surface vitrée - L x H
16" x 9 1/4"
Épaisseur de l'acier-contour
3/16"
Épaisseur de l'acier-dessus
5/16"
Largeur de la chambre à combustion
21"
Hauteur de la chambre à combustion
11 7/8"
Profondeur de la chambre à combustion
16 1/2"
Longueur maximale des bûches
20"
Positionnement des bûches
Chargement en largeur
Chambre à combustion recouverte de briques réfractaires
Oui
Matériel du coupe-feu
Vermiculite de haute qualité
Ouverture minimale de l'âtre (Largeur)
28 7/8"
Ouverture minimale de l'âtre (Hauteur)
23 3/8"
Ouverture minimale de l'âtre (Profondeur)
15 3/4"
Appareil haute efficacité certifié
Oui, approuvé EPA 2020
Norme canadienne (émissions)
CSA B415.1-10
Norme américaine (émissions)
EPA / ASTM WK47329
Norme canadienne (sécurité)
ULC S628
Norme américaine (sécurité)
UL 1482, UL 737
Garantie
Limitée à vie
Poids à l'expédition
405 lb (178 kg)
EPA-2020
Dégagements aux matériaux combustibles*
Canada
États-Unis
D égagement - Base de l'appareil au plafond**
84"84"
Dégagement - Parement latéral combustible
9"9"
Dégagement - Parement supérieur combustible
27"27"
Dégagement - Mur combustible de côté (pièce)
16"16"
Dégagement - Dessus de l'appareil à une tablette combustible 12"
27"27"
*Important : Les informations inscrites sur la plaque d'homologation de l'appareil ont toujours préséance sur les informations contenues dans tout autre média publié (manuels, catalogues, circulaires, revues ou sites Web).
**Certains appareils ont été testés avec une hauteur de plafond réduite. Avant la mise en place de votre unité, consultez le manuel d'installation.
1. Les performances sont basées sur une charge d'essai prescrite par la norme à 7 lb/pi³ et dont l’humidité varie entre 19% et 25%.
2. Rendement optimal à un taux de combustion spécifique (PCI).
3. Cet appareil est officiellement testé et certifié par un organisme indépendant.
4. La puissance thermique maximale (bûches de bois sec) tient compte d’une densité de chargement variant entre 15 lb/pi³ et 20 lb/pi³. Les autres données de performance sont basées sur une charge d'essai prescrite par la norme. La densité de chargement spécifiée varie entre 7 lb/pi³ et 12 lb/pi³. L’humidité varie entre 19% et 25%.
5. Telle que mesurée selon la méthode CSA B415.1-10.
6. Pouvoir Calorifique Supérieur du combustible.
7. Pouvoir Calorifique Inférieur du combustible.
8. Le rendement optimal du transfert thermique est pour le mode combustion lente (utilisant le PCS) et représente la capacité de l’appareil à convertir l’énergie contenue dans le combustible solide en énergie transférée à la pièce sous forme de chaleur et ne tient pas compte des pertes chimiques lors de la combustion.
9. La superficie de chauffage recommandée et le temps de combustion maximal peuvent varier selon la localisation de l'appareil dans l’habitation, la qualité du tirage de la cheminée, le climat, les facteurs de perte de chaleur ou le type de bois utilisé et d’autres variables. La superficie de chauffage recommandée pour un appareil est définie par le manufacturier comme sa capacité à conserver une température minimale acceptable dans l’espace désignée en cas de panne de courant.
Partagez votre opinion avec les autresVos commentaires sont importants pour nous. Partagez-nous votre expérience d'utilisation ou d'installation d'un appareil Drolet, ou encore sur le service à la clientèle avec notre équipe!
5 ★
1754 ★
1033 ★
162 ★
41 ★
2
Trier par : Plus récents
Plus récents
Plus anciens
Note: élevée à basse
Note: basse à élevée
Joseph 2025-09-22
--
Antony2025-08-29
Un beau produit qui a l’air robuste. Mais j’ai j’étais incapable de mettre la façade puisqu’il a, sois été accroché dans le transport ou bien il a sois été assemblé croche parce que du côté droit il n’avait pas d’espace pour rentrer la façade tandis que le côté gauche avait beaucoup trop d’espace. J’ai dû redresser un peu et maintenant c’est parfait. Somme toute c’est parfait, j’ai hâte d’essayer ça cette hiver.
Christopher2025-08-14
Easy to clean, easy to light, really puts out the heat and holds a lot of wood!
Krystal 2025-07-19
--
David2025-07-08
--
John2025-05-17
My fire box needs replaced. I shut the lights off to go to bed and noticed sparts flying out of blower. Something in the fire box had to break because we should not have sparks flying all over our house. Thanks John Myers My new email Is myers443m@gmail.com
Sergio2025-04-08
Having a problem with the fan working not happy about the heat sensor, if its not working properly I get no air circulation
Alexander 2025-03-09
--
Mike2025-03-05
Works great
Mike2025-03-04
Well made
James2025-02-04
--
Vincent2025-01-30
--
ashley2025-01-27
--
Jeff2025-01-25
A very good insert for the price. We replaced an old craft stove with an 1800i. Really happy with it, installation was fairly simple, as it was a replacement, and work such as removing the damper from the fireplace was already done. I would recommend purchasing the entire install kit package. We used the exact items, but purchased them separately. Seeing them flame through the glass door is also nice. The only issue I had was with the blower not activating correctly. You must make certain the sensor is lined up exactly. In our case, the tab was bent inward slightly, causing an improper alignment. Once corrected, it functions as it should. This unit does a nice job of keeping the house warm and offsetting a lot of the furnace use.
Chuck 2025-01-18
I've had this insert for 3 years grate love it
Brian2025-01-15
--
Jonathan2025-01-14
One of the most cost-effective wood inserts available.
Jared2025-01-12
--
Andrew2025-01-07
We are first time wood burning stove owners and are very satisfied with our Drolet Escape 1800-I. Although it is a bit physically smaller than what we expected the unit performs exceptionally well. It does a great job of offsetting our primary electric heating when temperatures drop below freezing. We are very pleased with the look of the stove and the quality of the materials and manufacturing.
Sammy2025-01-05
--
Cory2025-01-05
This unit replaced a 40 year old earth stove. The install was straightforward and had very little issues on installation. The only issue I had was installing the blower on the units as it just sits on a few tabs and is not real solid I also recommend burning off this unit before it gets to cold so you can open windows the first few burns. Over all I am happy with it so far but it’s only been a few months
Eugene2025-01-05
--
ROBERT2025-01-05
--
Josh2024-12-30
--
Gary2024-12-30
--
Irfaan2024-12-30
--
Danielle2024-12-18
--
Allison2024-12-14
Instructions unclear. steep learning curve - cant get more than 4 hours. can only load 16 in. pieces in east west
Kathryn2024-12-14
--
john2024-12-13
--
Pierre2024-12-03
--
Nicholas2024-11-30
--
Murrell2024-11-28
The unit came on a pallet that was about as tough as the insert itself. No problems with the shipping. Other than being heavy to move into place the insert is very solidly built. Have only fired up the unit twice but it performs very well. Will take a little getting used to the damper control but other than that well worth the investment.
Robert2024-11-26
Good size, heats well. Would prefer the blower to be little stronger but other than that......we love it.
Jerzy-Taras2024-11-25
--
Cecilia2024-11-24
--
Doug 2024-11-19
--
Lori 2024-11-16
Stove looks great, needs an ash box. But other than that, seems great. haven't tried it yet/
Cheryl2024-11-14
Used it for the first time last evening. Wood burned fine, but the blower isn't working.
joel2024-11-14
--
Tina2024-11-13
--
Scott2024-11-12
Great product, working well so far. Used technical for a blower issue they GM have been responsive and willing to help!
Richard2024-11-07
--
Greg2024-10-23
--
Eva2024-10-23
very good
Samuel2024-10-20
Looks very good ! Chimney liner is bit bigger than 6 inches, so be aware if your flue is 8 inches wide, it will not fit easily
Hermann2024-10-16
--
Adam2024-10-15
--
Brian2024-10-14
--
Michael2024-10-13
--
Jeremy2024-10-10
--
Steve2024-09-29
--
Mark2024-09-24
--
Devon2024-09-16
--
Kris2024-09-07
Looks attractive but it was 90 degrees today; I will use it when it cools.
Brendan2024-08-30
--
Brian2024-08-24
Looks awesome! I’m sure it’ll burn and heat my home nicely!
David2024-07-28
--
Mark2024-07-18
--
Bret2024-06-28
--
Dominique2024-05-19
--
Joseph2024-05-09
--
Joseph2024-05-09
--
Carlos 2024-05-05
Installation instructions were very written and customer service was very responsive with shipping damage.
Jesse2024-05-01
The 1800i is the best bang-for-your-buck insert that is EPA tax credit eligible. And it looks good too! My wife loves it, and that's all that matters to me.
Daniel 2024-04-30
--
Robert 2024-04-26
Well made and sturdy. I had to adjust the heat sensor to get the fan to run, but the sheet metal it’s mounted on is easily formed. It really puts out the heat with the blower running!
John 2024-04-02
--
John2024-04-01
--
Lynn2024-03-28
--
Wojciech2024-02-21
East to install, love it do far. Got done issues with Dan not working frequently but called technical support and Marty gave me done hints, hopefully it will improve fan run time and frequency
Michael2024-02-17
Door handle doesn’t lock tight
Anthony2024-02-14
So far so good! Looking forward to enjoying the beauty and efficiency this insert promises. Our first fire is warming the first floor of the house.
Dan2024-02-13
--
Andrew 2024-02-07
--
John2024-02-04
--
Nick 2024-01-25
--
Paul2024-01-24
Great price, fast shipping, arrived in perfect condition. Great stove with one major flaw. Stove was heated to 650 degrees and the fan would cycle on and off every few minutes. Room temperature would fool the thermostat and the fan would turn off, then on again 5 minutes +/- later. 650 degrees should be enough to keep the fan running. I may try to put some insulation around the thermostat or just bypass it all together. The fan is quiet, and the variable speed is nice, but the thermostat seems to be useless. Not a deal breaker, just a letdown.
Keith 2024-01-24
The stove came very well created, and the stove throws a tremendous amount of heat and the fire while burning has a very nice look.
Thomas2024-01-15
Great, inexpensive insert. Only downside is that the blower rattles sometimes.
Guillaume2024-01-11
--
Michael 2024-01-06
Nous aimons le modèle qui s’insère dans notre ancien foyer. La chaleur qui se dégage de ce nouveau poêle est nettement une amélioration de ce que nous avions.
Jose2024-01-05
--
Christopher2024-01-04
--
Alexander2024-01-02
Just had this unit installed and have used it for a week or so. We love it, keeps the front room 75 degrees after it's heated up and the rest of the house 65 degrees or so in a 2,100 sq ft home in Northern CA. Initial burn did produce a smell from the paint curing, but completely went away after the 1st burn. I noticed the fiberglass door sealant already has a big missing piece in it so will contact manufacturer to see if I can get a replacement shipped.
Noah2024-01-01
--
Patrick2023-12-27
--
Paul2023-12-13
--
Renee2023-12-05
--
Brian2023-12-04
--
Jennifer2023-12-04
--
Jonathan 2023-12-04
So far so good. Only complaint is that a part of my gasket got singed and burned off after the second use. Doesn’t appear to have burned enough to affect the function.
Mark2023-12-02
Love the stove. However the blower did not come on during first burn.
David2023-12-02
--
John2023-11-28
Haven’t used it yet , but so far everything has gone great
Sarah2023-11-27
Works well. Installed well. Would like it to have a more powerful blower.
Joseph2023-11-21
Love my stove. It works perfectly!
Melissa 2023-11-20
--
Joseph2023-11-05
Unit works as advertised. Easy installation. Good customer service. No issues whatsoever
Richard 2023-11-04
Very good quality nice unit
Bill2023-11-01
--
Ted2023-10-29
--
Walt2023-10-29
--
Chris2023-10-27
--
Eric2023-10-26
--
Helen2023-10-17
--
Rochelle2023-10-09
--
Mark2023-10-08
--
Jeff2023-09-22
It hasn't yet been installed - we're waiting on the contractor - but we're excited about it - and also about finally retiring our veteran Drolet woodstove - but we're eager to reclaim the floor space that the old warhorse takes up when we switch over to the insert.
Jon2023-09-15
--
John2023-09-11
Purchased in October of 2022 but didn't receive until March 30, 2023. Quite disappointed with the delay but all seems to be delivered in satisfactory condition.
Rebecca M.2023-08-22
I like the way it looks but it's too warm to use at this point.
Eric2023-07-22
--
Rainer2023-07-17
--
Robert2023-06-20
Leveling bolt broke off. Everthing else was good.
Joshua2023-06-03
--
Eric2023-03-27
--
Kevin2023-02-17
--
Robert2023-02-04
--
Shayne2023-01-31
Awesome unit, heats my house like no other. My friends and family are all interested in buying now.
Howard2023-01-27
--
Eric2023-01-24
--
Kenneth2023-01-21
--
Gaetano 2022-12-31
--
Charles2022-12-30
--
Brock2022-12-30
You absolutely have to have dry wood! You have to split a piece and check it with a meter. If over 20% you’re not going to get a good burn unless you open the door. All epa drives are like this. I dried wood takes all you’re heat to get rid of the moisture. Now, this is a great stove for the money. Hard to find anything close to this at the price. It throws a ton of heat. I have to crack windows in my 1300 ft home. Even heats the basement if I turn the central air blower on. Leave the door open a crack to get a hot fire going. Shut down will fill air on. Then slowly cut the air back to your setting little by little. Make sure you’re keeping the secondary reburn going. Excellent stove. Blew me away compare to older style drives. Way more heat. Very pleased
Brian2022-12-25
--
Christopher2022-12-22
Got 3 burns in and its working great, supper hot. Installed it myself, it's close to 400lbs so be ready, specially going down stairs. The 6 in liner is fun too, specially with an old chimney that takes a turn. But it does looks sharp and cranks out the heat.
Mike2022-12-20
--
Ryan2022-12-18
--
Alton2022-12-09
My blower got sent to me damaged and am trying to get a replacement
Diana2022-12-07
Install was easy except the liner was tough, recommend getting the pull through cap and you may need assistance as the flex is not that flex. Otherwise easy install, very heavy, produces tons of heat, burns efficiently as expected. The blower is automatic based on stove temperature so in case you're trying to figure out why it does not turn on initially, the stove has to get hot enough and then it turns on automatically with a shut off know and can adjust rate of fan. Happy with our stove!
Jacques 2022-12-06
--
Todd2022-12-05
Great unit and easy to use and install
Samuel2022-11-30
While I am quite happy with the stove the bricks and crumbling after only a few fires. Please replace them. Once you have replaced the bricks, I will write a very positive review
Reuben2022-11-27
Works well. Only issue is the noise from the blower. Kinda a rattling.
David2022-11-24
The unit is working perfectly. However, being my first time doing this I was unaware that I really needed the insulation blanket for the stainless steel tube and the offset box to get the unit in the correct spot. Everything came in great condition and the FedEx guy helped me get it into my garage using his pallet jack. I am very happy with this purchase.
Corrine2022-11-20
--
Chris2022-11-20
--
Anthony2022-11-18
Very happy with the insert so far. We have completed the few conditioning burns and have our first stretch of cold weather over the next few days. The stove throws off a good amount of heat.
Bethany2022-11-18
--
Kyle2022-11-16
Works well! Firebox is sufficiently large. Wish the blower fan was a little quieter but it definitely does the job.
Job 2022-11-16
Good unit for the money.
Kevin2022-11-16
--
Greg 2022-11-13
I am very satisfied with my drolet 1800 insert. Well worth the cost and install process.
Joe2022-11-12
--
Kyle2022-11-09
--
Thomas2022-11-09
--
Charles2022-11-08
Very excited about this product.
Adam2022-10-30
--
Rawni (Rhonda) 2022-10-28
--
John2022-10-26
--
Erik2022-10-25
--
Travis2022-10-23
--
Jeffrey2022-10-22
--
L.S.2022-10-20
This is the 4th Season for my Escape 1800-I . Works great produce plenty of heat and you can see the fire.
jay2022-10-17
--
Miranda2022-10-17
My Fireplace products website was super easy to navigate and order from. My coworker recommended this site to me as I have a propane boiler heating system that costs quite a bit especially with gas prices this year. I had a pre existing fireplace that needed a new liner, fire blocking, etc. This wood stove was easy to install without all the hassle and was super inexpensive compared to similar products in my area. The stove came within a couple days and is heating my house with no problem!!! My house is so warm I’m able to open my three seasons room and heat my basement (via fan). Would highly recommend!!
Sean2022-10-17
Arrived in good time. Easy to install. Manual is thorough and easy to understand. Blower works well and is not too loud.
Derek2022-10-16
--
rex2022-10-14
--
Lisa2022-10-11
Takes a long time to heat up in order for the blower to turn on. No on/off....only a thermostat sensor will turn on the fan. Intake on the blower rattles loudly...have to put a log or stone on top to quiet it. Blower is strong and unit heats up the family room and adjoining kitchen nicely.
Larry and Virginia 2022-10-11
We are impressed with the service from and response of Drolet. The fireplace insert was professionally installed last Friday, the 7th of October, and we are ready for the winter season. Everything was in good shape except for a cracked tile in the upper part of the stove.
Mathieu2022-10-05
--
Constance2022-10-02
We bought this stove a few months ago. Just started using it for about 2weeks now. I really like how it burns. We had a different wood stove for 10 yrs, was a little nervous that is would not be as efficient as my old one. I am really happy I bought this stove. It works really well. Very happy customer.
Tyler2022-09-21
--
Jason2022-08-18
Too soon to tell
Susan2022-06-25
--
Cris2022-05-28
It is beautiful and puts out a lot of heat. I just can not figure out how to keep it burning properly without having the door open a hair line....The draft should is good, tall chimney. It is as if the air controler does nothing whether it is fully pushed in or pulll out...
Larry Burk2022-03-07
I noticed that after 4 small fires, the door gasket developed a 1 cm defect at the bottom of the door.
Vincent Peszek2022-02-12
Great product just learning how to get the most out of it. First wood stove insert
Donald Klybas2022-02-12
Donald White2022-02-03
Works better than expected. Heats the front of the house to over 70. Will cut my electric heating bill in half. Very happy with my purchace
Michael DeRan2022-01-19
Robert Haines2022-01-17
Pamela Stidham2022-01-17
Sweet
Paul Haynes2022-01-16
Brad Giffin2022-01-13
L D Barney2022-01-12
Troy Johnson2022-01-08
Marcus Proctor2022-01-08
Excellent wood insert, likes dry wood and the 6" chimney liner. Burns about 3-4 hours and hot embers for another 5+ hours at night. We have used it for a month and really have enjoyed it. Marcus Proctor
Christian 2022-01-03
Très beaux et performants
Greg Strahm2021-12-25
Excellent product. Even better customer service if you have questions. Have recommended to others already. Drolet 1800 insert will exceed expectations!
Micah Satterlee2021-12-24
William Gillies2021-12-22
Haven't used it yet. Installation in-progress
Kristie Lugo2021-12-22
It’s a decent unit for the price. I would not say the fire burns 8 hours. I might not be used to it but it’s only a few hours for me. The rope that is used to seal the door and the stove is starting to come apart and tears a little bit more every time I open it when it’s been burning for a while so that seems to be an issue with potential smoke escaping.
Larry Samuels2021-12-12
Linda Thomas2021-12-11
Earl Burke2021-12-09
My second time purchasing a Drolet wood burning stove. Very well built at a fair price. I also referred 2 friends to buy Drolet. They are happy also. Thanks
Karl Ashenfelter 2021-12-06
Hannah Smith2021-11-28
Walter Scauzillo2021-11-19
To this point there have been several issues: 1. The nickel trim kit is missing 2. The 5/8” x 8’ black door gasket kit is frayed and needs to be replaced 3. The ceramic thermodisc is non responsive and needs to be replaced. The blower unit is noisy and vibrates during operation.
Sandra Fowler2021-11-14
easy to put together and install. so far we have had problems with not enough air flow and are trying to remedy this.
Eric Terwilliger2021-11-13
Jamie Critelli2021-11-09
June Saville2021-10-31
Yelena Sheptovitsky2021-10-23
Well made unit. Arrived with one broken fire brick, but customer serviced shipped out a replacement brick as soon as we notified them. The door latch operates very smoothly.
Barb Detwiler2021-10-11
Gregory Estep2021-09-30
Robert Barrentine2021-09-27
Sam Spiropoulos2021-09-15
Sam Spiropoulos2021-09-15
Ron Toussaint2021-07-29
Trevor Skogen2021-07-24
Allen Coleman2021-06-17
The unit appears very well made. The only issue was I discovered 2 broken firebricks upon unpacking. It looks like the side & back wall firebricks would fair shipping better if they were longer and the bottom bricks could then hold them in place better.
Matthew Klenc2021-05-28
kathy gordon2021-05-14
Robert Smith2021-05-05
Jeffrey Baldwin2021-04-17
Haven't had a chance to use it yet but it seems well made and a good value
Jacob Medlin2021-03-16
Brian Hennig2021-03-09
Albert Pensiero2021-03-05
John Balog2021-02-22
Mike Lavoie2021-02-14
gary kushner2021-02-06
Stove design with a top flu was more difficult to install than a design with a rear flu, plus insert does not project outward on the hearth to produce extra heat. Without the blower the heat results would not be satisfactory.
James Gonnella2021-02-02
Overall my insert has met all my expectations and what I wanted from a wood burning insert.
Jessica Naberhaus2021-01-24
Matthew Rumenapp2021-01-19
Joseph Hawkinson 2021-01-18
David Parsons2021-01-13
Luc Laurin2021-01-07
Michael Jackson2021-01-02
Drolet 1800 Escape is serving us well and heating the living and dining area our 1450 sqft ranch well. The install went well and the instructions were good. The only thing I would have liked is more instruction on using the oxygen regulator and if the screws to hold the faceplate were painted black, which we did. This is a great unit.
Tim Keller2021-01-02
Rebecca Hall2020-12-23
John German2020-12-22
This stove replaced an old Timberline insert. This stove is great quality, much more efficient, and warms more of our house. On top of that it is nice to have the glass door to see the fire.
Andrew Gouge2020-12-14
KEVIN MURRAY2020-12-13
Brought through Amazon. Impressed on quick delivery.
Scott Buckheit2020-12-07
Well made and keeps my house warm. I have a heat pump and this keeps my 2000 Sq ft Split Level home around 69-70 degrees when it is below freezing. The stove is in the basement and the thermostat is on the top floor. The heat pump does not even kick on. The quality is top notch and I am very happy with my purchase.
John Weston2020-12-05
The unit performs to expectations. I have used it for six weeks and the only problem has been that the lower hinge plate that extends from the unit to hang the door was welded out of alignment so that the weight of the door rests entirely on the lower plate, and so that the lock ring on the pin for that lower hinge keeps coming off from normal use. It's a small thing, but I'm going to customer service to make sure it won't turn into a safety hazard.
Rebecca Macleod2020-12-03
Thomas Iiams2020-12-01
It looks good I emptied the parts to make it lighter to move into the house, very well made, the welds look good and strong. Time will tell the tale I had to order a 45 degree elbow for my new chimney liner because your discharge is at the top the original one I was going to get had it in the back with a 45 degree angle that would had line up perfect but for your stove I had to order a 45 stainless elbow. But no worries I think it will last a very long time.
Joelle Grossnickle2020-11-30
Tim Crouch2020-11-28
this unit is solidly built and is well created for shipping. I have been using it about six weeks when I write this and I find that it behaves exactly as the owners manual describes. The glass stays clean, the air control is very linear and makes it easy to control the fire. The door and its gasket, and the latch, are straight and square and fits snugly. Very easy to assemble the blower unit. It is a clean looking and well-made item.
Charles Kelley2020-11-20
Great product! Super efficient. Should've got rid of that fireplace a long time ago!
Patrick Gilchrist2020-11-17
John Stephansky2020-11-11
Stephen and Margaret Hughes 2020-11-09
Austin Summers2020-11-03
Gary Jodzis2020-10-31
Great results start to finish dealing with MFP. Insert is working beyond expectations.
Richard Sabulsky2020-10-30
daniel tullo2020-10-28
arrived damaged but seems like a solid unit. mine came with the stainless steel chimney pipe and chimney cap too which appear to be of good quality.
Steven Walters2020-10-27
Casey Baker2020-10-26
Glenn Chorney2020-10-25
Glenn Chorney2020-10-25
Jesse Sopko2020-10-24
Aaron Jansen2020-10-24
instructions could be better, a simple video would be nice. Overall, solid product so far.
Kevin Hummel2020-10-23
Stephany Mallette2020-10-21
Tyler Atkins2020-10-14
William Glover2020-10-14
Gail and Phil Mosley2020-10-08
We have been using this fireplace wood insert for about 3 weeks. We have found to be of great quality. We ordered it from this company because we are so pleased with our kitchen stove from Drolet. It works great and gives the heat as we had expected. Love being able to see the fire when in use.
Jason Kirouac2020-10-03
Sao Yang2020-09-30
Great deal, works better than expected.
Julie Smith2020-09-30
Scott McKinnon2020-09-15
John Grant2020-09-14
Kansas Jones2020-03-08
Brandon Strouse2020-03-02
Purchased the Drolet 1800i as it appeared to be the best “bang for your buck” that fit the dimensions we needed. Install specs and manual is well laid out for you and the unit went in as easily as you would expect a 400 pound block to go. Overall I am super happy with the quality of the unit and the appearance is all that we expected. Heat output is great and the viewing window is pretty large in comparison to over models. We are happy
Bethany Parsons2020-02-24
Harvey Marks2020-01-15
Francois Dionne2019-12-13
Americo Silva 2019-11-14
Jean-Pierre Helie2019-11-06
thomas leonard2019-10-26
Tim Keller2016-01-18
Emil Lynch2016-01-10
Nice unit. Twice the heat from half the wood of open fireplace. Don't use the blower. Plenty of heat without it.
Brad Barcom2015-11-14
Great product at a great price. Very satisfied!
Jim Heller2015-11-13
James Young2015-11-06
Joe Pogatchnik2015-09-23
DAVID TSANG2015-05-14
Donald Korinchak2015-03-27
Mindy Merenghi Merenghi2015-03-22
Ott Zuercher2015-01-30
roger miller2015-01-05
earline comalander2014-12-28
Jason Beder2014-12-25
William Miller2014-11-20
Schaun Fogarty2014-11-05
Joseph Novotny2014-11-01
Gary FITTERLING2014-10-12
Kraig Wheeler2014-06-21
Brandon Tibbitts2014-03-01
drew knoop2014-02-05
Michael Allen Allen2014-01-18
William Gilbert2014-01-10
Chris2013-12-24
Very happy with the unit. Good size and easy to set up. Was able to change the side that the power cord for the blower with a premade hole! Great heat output from the first small fire, but there was a lot of "smoke" from the paint curing process.
Joan Michels Michels2013-12-16
Tristram West2013-12-10
I recently purchased an Escape 1800-I wood stove insert. I installed this with a 6in flex chimney liner in a house built in 1940 with damaged interior chimney tiles. My goal was to get the chimney functioning, provide extra heat (old houses are drafty), and generate a nice ambiance. I am very happy with the purchase. The stove met my expectations.
Jonathan Kermiet2013-12-09
Dennis Muirhead2013-12-05
James Dilks2013-11-26
TIM PHILLIPS2013-11-14
Anthony J. Kamycki2013-11-11
Brian Walsh2013-10-13
Wow! Could not be more satisfied. This stove is extremely well built. The heat output is tremendous. I was taken back on how efficient and the amount of heat this stove put out. Well done SBI!
Victor Legg2013-02-16
carl conlon2012-11-18
george thompson2012-11-16
We have been using the unit for about 2 weeks, the temps have been getting down to the 20's at night. So far we havent had to turn on our furnace. We have a 2 story home. Our fireplace does have the benefit of being centrally located in our home. We love the woodburner, would recommend to anyone.
Gary Schwark2012-11-05
Very satisified!!! Replaced a 25 yr old insert that developed a heat exchanger leak. Can't get over the increased efficiency over the old one. Burns significantly less wood for the same heat output. Excellent quality/workmanship! I've recommended your products to friends and family.
