Accessories

Used to regulate the chimney draft to prevent excessive temperatures.

This protective cover is specially designed for our Mistral outdoor fireplace and combines style, quality and durability perfectly: 600 denier fabric reinforced at the four (4) lower corners and solid seams, waterproof thanks to the inside coated with an ecological water-repellent substance, treated for increased resistance to fading and weathering, elastic cord in the bottom edge and cord clamp for a perfect fit.

This protective cover is specially designed for our Bora outdoor fireplace. Made of 600 denier waterproof polyester, the cover has increased fade and weather resistance to protect your fireplace when not in use. The U-shaped hooks, located on the lower edge of the cover, hook onto the base of the fireplace to keep the cover securely in place.

This heat shield is used to reduce the minimum height required between the base of a fireplace
and a combustible shelf when installing a zero clearance fireplace. This heat shield fits under
the shelf and can accommodate a shelf depth from 6" (152 mm) to 12" (305 mm) and up to 84"
(2.1 m) in length.

This kit contains: 2x pipe clamps and 1x outside wall termination.

This device opens and closes the fresh air supply to a wood or pellet heating appliance being certified with a 4" fresh air intake kit. Its simple mechanism makes it possible to close the damper tightly when the heating appliance is not in operation.

This device opens and closes the fresh air supply to a wood or pellet heating appliance being certified with a 5" fresh air intake kit. Its simple mechanism makes it possible to close the damper tightly when the heating appliance is not in operation.

Includes: fire starter (50 bags), stove paint 85 g, high quality gloves, digital moisture meter, glass cleaner (500 mL - 16.9 FL.OZ) and thermometer with probe for double wall venting.

Includes: 1x filter, 1x filter holder, 2x air deflectors and fixing screws. Be sure to clean and replace your wood furnace filter regularly to protect the blower motor from dust accumulation. If the filter is not cleaned regularly the furnace will overheat.

Specifically designed to deflect the wind (problematic installation when the 6" chimney is exposed to strong winds) and so reduce the risk of smoke blowing back into the home where the stove is installed.